The product secures the catheter.
The product is a flexible polyurethane non-woven material with a central diamond window. The window part is “CATHEREEPLUS™, a highly moisture-permeable film dressing. The dressing can be easily applied and the puncture site can be observed.
EOG sterilized
With “diamond window”, easy positioning when applying
- The puncture site is visible from the diamond window, so you can apply it to the exact position.
Carrier-less design allowing neat application
- Carrier-less and highly flexible polyurethane non-woven fabric allows it to be firmly adhered to the skin without gaps.
Stick firmly using the attached fixing tape.
- As the attached fixing tape can be applied without touching the adhesive surface, it can be handled hygienically. Can be applied with gloves on.
The observation window is made of CATHEREEPLUS ™.
- CATHEREEPLUS ™ uses a newly developed urethane gel adhesive. As a result, this dressing has become “highly moisture-permeable” (compared to our company), and has achieved both “gentle to skin” and “high adhesion” at a high level.
Attach the included fixing tape to the connector on the indwelling needle side.
Grasp the release liner at both sides of CATHEREEPLUS I.V. and apply so that the puncture site is in the center of the the window.
Apply the product along the catheter so that the product is in close contact with the catheter, and peel off the release liner at both sides.
Apply the second fixing tape to the tube in a Ω shape.
Use the remaining fixing tape to fix looped tubes.
- The product is used for fixing injection needles and catheter insertion sites.
1. Important basic cautions
1) Clean and dry the area around the insertion site before applying the product.
2) Choose the appropriate size product for your purpose.
3) Do not apply with the product extended, as it may cause skin damage and peeling.
4) If symptoms appear to be infection or skin disorder rash / redness, blisters, skin peeling, itchiness, etc.) on the application site, discontinue use and take appropriate treatment.
5) During application of this product, observe the fixation condition of the catheter and peeling of the tape, etc., and reinforce the fixation or replace this product as necessary.
6) When showering, be careful not to allow water to enter the puncture site. If water gets into the puncture site, replace this product.
7) When removing, peel off slowly along the flow of the body hair to prevent skin damage.
8) When removing the product, take care not to remove the catheter or other devices while holding down the catheter or skin.
2. Additional cautions
1) Do not use this product if its packaging is soiled, damaged or wet.
2) Use immediately after opening the package.
- Store at room temperature, away from water, high temperatures, high humidity, and direct sunlight.
| Product number | Size | Per box | ||
|---|---|---|---|---|
| Adhesive area | Observation area | Catheter fixing tape |
||
| IV0608 | 60mm x 80mm | 34mm x 39mm | 15mm x 80mm × 3 sheets | 35 sheets |
| IV0811 | 80mm x 110mm | 44mm x 51mm | 30 sheets | |
